anycubic kobra go awarded editors choice

A friendly introduction to 3D printing

If you are looking for an informative and affordable entry point for 3D printing, the Anycubic Kobra Go is an excellent choice. While it offers some of the best functional elements of filament printing, its trade-offs are limited. If you want to learn and enjoy rewarding DIY projects, this is a great investment.

Feature guides

  • PLA/ABS/PETG/TPU prints
  • Easy to adjust handle strap
  • Bowden Extruder
  • 25 points automatic leveling

  • Brand: Anicopic
  • build size: 8.66 x 8.66 x 9.84 inches (220 x 220 x 250 mm)
  • print resolution: ± 0.1 mm
  • Delivery: MicroSD / USB-C
  • hot building plate: Yes (≤ 230°F / 110°C)
  • Feeding type: Boden extruder separation
  • Dimensions: 19.3 x 17.5 x 17.4 inches (490 x 445 x 443 mm
  • Weight: 7 kg (~15.4 lbs)

  • Compact printer with bigger build size than expected
  • DIY assembly introduces you to the main components and functions of the printer
  • Easy to load and remove the wick
  • The spring steel magnetic building plate is easy to use
  • One button automatic adjustment

  • Small LCD screen
  • Some assembly steps prove difficult without a smaller set of hands
  • Needs careful adjustment to reduce wear and debris from the boom wheels (pulley bearing)

buy this product

Anycubic Kobra Go provides an educational introduction to 3D printing. With a focus on DIY assembly and accessibility, users are encouraged to slow down from the rush to print and gain a deeper understanding of the machine itself.

Anycubic Kobra Go . preparation

When you take a peek at the packing list for the Anycubic Kobra Go, there’s a lot to take in. As with most assemblies, it is advisable to make sure that each part is counted and ensure that the wires are not damaged in transit. While some parts can be replaced more easily than others, it’s better to take everything into consideration rather than risk disrupting mid-assembly.

For those who are already familiar with laser engraving or 3D printer assembly, the process should not be too unfamiliar. However, if this is your first time assembling a printer, you will need to take your time to ensure every orientation is accommodated. While the written assembly instructions provide a useful reference point, it is recommended to check Anycubic Support Installation video For cross reference.

In addition to trying to ensure the right piece fits, there are only certain steps that pose more difficulty. These usually involve tight postures, so if you have a large group of hands, there may be some sluggishness. Additionally, I felt that the wires could have been rated more accurately for faster installation and less visual double-checking.

Regardless of your skill level, these steps provide an intuitive insight into the functions of the Kobra Go. When you’re done, you’ll calibrate the Kobra Go and make adjustments to the likes of the eccentric nuts. These steps are very crucial; You’ll want to reduce wear and tear on the printer wheels.

Anycubic Kobra Go . Technical Specifications

If you are not yet in the process of discovering DIY in 3D printing, the Kobra Go still offers many of the basic features that users would want in a 3D printer.

For example, the printer has a smaller footprint of 19.3 x 17.5 x 17.4 inches while offering a build size of 8.66 x 8.66 x 9.84 inches. For ease of use and to get printing without fatigue, there is also automatic leveling and a magnetic spring steel build plate. Likewise, you can make adjustments to the belt through a knob, which allows for easier adjustment after setup.

As a trade-off for some of the more functional items, the Anycubic Kobra Go comes with a smaller 2.4-inch LCD screen. Likewise, it features a separate Bowden tube to the extruder, which some may consider inferior to direct drive extruders (But not necessarily).

Explore Anycubic Kobra Go

When compared to the base model Anycubic Kobra, the Kobra Go’s touchscreen measures 2.4 inches, compared to 4.3 inches on the standard Kobra. While the compact size won’t be popular with everyone, it complements the overall compact design.

transponder control dial; There is not an infinite number of lists to scroll through.

If you need to stop printing and make adjustments to the likes of a Z-offset, this is generally a smooth procedure. For their limitations, they are mostly minor annoyances in exchange for a lower price point.

Using Cura for your prints

If you’re not familiar with the Ultimaker Cura, Anycubic does a good job of introducing new users to the program. By following Anycubic’s instructions, you will set up a custom machine profile for the Kobra Go. For added ease of use, Anycubic also provides print parameter files for different filament types to get you started.

As with most pre-set settings, these are a good foundation to start learning; It also veers to the safer side of printing. With different models, this can result in less-than-ideal print results, so it’s a good idea to do some standard printing to check areas that need adjusting. For example, with models that need support, the default Anycubic parameters tend to be difficult to remove, so you will need to modify them.

When printing, the Anycubic Kobra Go supports both online and offline printing. For most users, the option of saving GCode files to a memory card and inserting them into the printer provides a more flexible experience.

To print online, you must first install the CH340 driver file from the included microSD card. From here, you can connect the Kobra Go to your computer via a USB-C cable and choose to print via USB within the Cura. While it is not recommended, if you want more operational control of the printer during the printing process, it is an alternative option.

Printing with Anycubic Kobra Go

No matter how you use Cura to start printing, there are a few details to keep in mind. You’ll need to take advantage of the Kobra Go’s automatic leveling and make sure to clean the build plate after a few prints to ensure proper adhesion continues. Kobra Go typically has a print speed of 60mm/sec with a maximum possible print speed of 100mm/sec, so you will notice some difference in print speed tests.

As one might expect, smaller, less complex models usually only take a few hours. Whereas larger or multiple-print models with increased travel time between positions can easily pass a day at print time. You’ll also need to adjust the printer’s Z offset after flattening to prevent any spaghetti-like results from your prints.

Once you’ve made the adjustments in the Cura and made sure you have a proper Z offset, it would be a simple matter of letting the Kobra Go print away. After printing is completed, the magnetic spring construction plate greatly simplifies model removal. Heavier prints or a full build area can slow down the initial removal of the magnetic plate from the printer; We welcome the option of bending and detaching on most models.

For more fine prints, such as functional parts, you may want to use a cleaner removal tool.

When it’s time to change the fuse, it’s easy to select the loading or unloading option from the Kobra Go’s LCD screen. After the filament is warmed up appropriately, the process takes just a fraction of inserting or removing, so you can focus on your next printing step.

Maximize the printing potential of the Anycubic Kobra Go

Since the FDM printer is beginner friendly, there may be some initial hesitation when moving to more complex horizons. Whether you want to scale up your entire print bed or scale-up models, the Kobra Go delivers the same quality results. During the testing period, I used three types of Anycubic 1.75mm PLA silk thread.

Each of these was perfectly adaptable to different fill settings and provided exemplary, lasting results. While there are more durable or flexible types, I have been able to handle more hollow out Halloween decorations while still providing functional toy parts for assembly.

Depending on your intentions in Kobra Go, it’s an inexpensive way to explore many types of fun and hands-on projects. Despite using the Bowden extruder, I didn’t experience any clogs or serious problems after the constant back-to-back prints. If you are careful with your settings and printer maintenance, this is a very smooth process no matter how difficult you are.

While you will still be somewhat limited in size due to the compact size of the printer, you can still get very similar results to medium-sized resin printers.

Cleaning Anycubic Kobra Go

With filament printing, cleaning the forms is an important follow-up to the process. Careful use of the settings can eliminate an excessive need for sanding or cutting off very stiff supports. Anycubic provides some cutters to help with the initial assembly of the Kobra Go, but you’ll want to consider investing in your own sandpaper and maybe some file tools for the smaller models.

While cleaning printed forms with Anycubic Silk PLA, the forms held up both sandpaper blocks and filing tools evenly. Since I usually print the draft profile inside Cura, I expected more cleanup in the drawing. But depending on your available print time and concern about layer fonts, there is a trade-off that needs to be weighed.

Should You Buy Anycubic Kobra Go?Anycubic Kobra Go Diversified Model

If you’ve been waiting for a 3D printer, the Anycubic Kobra Go makes an excellent budget entry point so you’re familiar with the process. In addition to its forgiving price, it tries to deliver the basics without degrading the experience. Likewise, it is an excellent option for those with limited space.

But if you’re not a fan of assembling the vast majority of your printer, you might want to take a look at some of Anycubic’s more premium options. The Kobra line itself attempts to cover a wide range of uses; The Kobra Go achieves a competitive price point compared to the likes of the Ender series.

While there is no one-size-fits-all 3D printer, the Kobra Go offers an excellent DIY option that makes 3D printing even easier. If you’re willing to explore and learn a bit, it’s a great choice that produces both practical and imaginative results.

#friendly #introduction #printing

Leave a Comment

Your email address will not be published. Required fields are marked *